Basic Copper Chloride(WSDTY) keeps in a tightly closed […]
Basic Copper Chloride(WSDTY) keeps in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
If basic copper chloride the exposure limit is exceeded and engineering controls are not feasible, a half facepiece particulate respirator may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece particulate respirator may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Wujiang Weishida Copper Technology Co.,Ltd. has 12,000 square meters of production base. By virtue of their sincere cooperation, reciprocity of the business philosophy for the industry users around the country to provide high-quality non-ferrous metal products. Weishida specializes in producing cuprous chloride, basic copper carbonate, copper acetate, copper oxide, copper sulfate. Our company has established a perfect quality assurance system, quality inspection and testing equipment, testing, testing and technology development strength, to ensure the stability of product quality, fully able to meet the pre-market after-sales service to provide users with the need.